| |
| Finite element method modeling and optimization of the mechanical behavior of a low-temperature PEM fuel cell |
| |
| Unsteady three-dimensional multiphase modelling of anode flow distributor in PEM electrolysis cell |
| |
| Performance assessment and optimization of the PEM water electrolyzer by coupled response surface methodology and finite element modeling |
| |
| Determination of heat transfer characteristics of tube bundles over heating plate by machine learning |
| |
| Unsteady three-dimensional multiphase modeling of anode flow distributor in PEM electrolysis cell |
| |
| Virtual Analysis and Optimization of Fuel Consumption for Diesel-Powered Buses |
| |
| PEMEC performance evaluation through experimental analysis of operating conditions by response surface methodology (RSM) |
| |
| Experimental investigation on performance evaluation of PEM electrolysis cell by using a Taguchi method |
| |
| Unsteady three-dimensional multiphase modeling of anode flow distributor in PEM electrolysis cell |
| |
| Optimization of operating parameters for boosting the performance of the PEMEC by the response surface methodology |
| |
| NUMERICAL AND EXPERIMENTAL INVESTIGATION OF TUBE BUNDLE HEAT EXCHANGER ARRANGEMENT EFFECT ON HEAT TRANSFER PERFORMANCE IN TURBULENT FLOWS |
| |
| Hydrogen PEMFC stack performance analysis through experimental study of operating parameters by using response surface methodology (RSM) |
| |
| Three-dimensional modeling of gas-liquid flow in the anode bipolar plate of a PEM electrolyzer |
| |
| Performance evaluation of direct ethanol fuel cell using a three-dimensional CFD model |
| |
| Assessment of the PEMFC performance: a CFD study based on channel width to rib width ratio effect |
| |
| Numerical investigation of the effect of blocked gas flow field on PEM fuel cell performance |
| |
| A CFD Modeling Study Based on Relative Humidity Effect on PEMFC Performance |
| |
| Hydrogen PEMFC stack performance analysis through experimental study of operating parameters by using response surface methodology (RSM) |
| |
| CFD Investigation of Different Flow Field Designs for Efficient PEMFC Performance |
| |
| A CFD Modeling Study Based on Relative Humidity Effect on PEMFC Performance |
| |
| CFD Investigation of Different Flow Field Designs for Efficient PEMFC Performance |
| |
| Design of heat pipe assisted thermoelectric generator and experimental investigation of power performance |
| |
| Experimental investigation of heat transfer on trapezoidal channel with three passes |
| |
| Design of Heat Pipe Assisted Thermoelectric Generator and Experimental Investigaton of the Power Performance |
| |
| Experimental investigation of heat transfer on trapezoidal channel with three passes |
| |
| Performance Analysis of a PEM Fuel Cell Stack Having 150 cm2Active Layer by Using Design of Experiments (DOE) |
| |
| CFD modelling and experimental validation of cell performance in a 3-D planar SOFC |
| |
| Experimental study on performance evaluation of PEM fuel cell by coating bipolar plate with materials having different contact angle |
| |
| Evaluation of the effect of reactant gases mass flow rates on power density in a polymer electrolyte membrane fuel cell |
| |
| Assessment of single-serpentine PEM fuel cell model developed by computational fluid dynamics |
| |
| Computational investigation of the velocity and temperature fields in corrugated heat exchanger channels using RANS based turbulence models with experimental validation |
| |
| A Three-Dimensional Model of Single PEM Fuel Cell Having Triple-Serpentine Flow Channel Developed with CFD |
| |
| AN EXPERIMENTAL INVESTIGATION OF SOLID OXIDE FUEL CELL PERFORMANCE AT VARIABLE OPERATING CONDITIONS |
| |
| Finite volume simulation for convective heat transfer in wavy channels |
| |
| An experimental study of response surface methodology to optimise the operating parameters on PEM fuel cell |
| |
| Online Implementation of an Adaptive Calibration Technique for Displacement Measurement Using LVDT ASOC D 14 00195 |
| |
| A Multi Criterion Fuzzy based Energy Efficient Routing Protocol for Ad hoc Networks ASOC D 15 00436 |
| |
| Artificial Neural Network utilizing Adaptive Tabu Search ASOC D 15 00849 |
| |
| A Self organizing Cascade Neural Network with Random Weights for Nonlinear System Modeling ASOC D 15 00948 |
| |
| Neural Speed Estimator for Line Connected Induction Motor Embedded in a Digital Processor ASOC D 15 01339 |
| |
| Identification of Hidden Neuron Number in Ensemble Neural Networks for Wind Speed Forecasting ASOC D 15 01200 |
| |
| Neural Speed Estimator for Line Connected Induction Motor Embedded in a Digital Processor ASOC D 15 01339R2 |
| |
| Neural Speed Estimator for Line Connected Induction Motor Embedded in a Digital Processor ASOC D 15 01339R1 |
| |
| Neural Speed Estimator for Line Connected Induction Motor Embedded in a Digital Processor ASOC D 15 01339R3 |
| |
| Investigations on Performance and Emission characteristics of a Diesel Engine fueled by Castor Biodiesel ATE 2015 9484 |
| |
| Optimized design for flexible polymer thermoelectric generators ATE 2015 10432 |
| |
| Impact of TES type Thermal Energy Storage type distributed heat storages on the effectiveness of operation of a district heating network ATE 2015 10541 |
| |
| An Experimental Study on the Effects of Diesel and Jet A1 Fuel Blends on Combustion Engine Performance and Exhaust Emissions in a Direct Injection Diesel Engine ECM D 15 00277 |
| |
| Effect of n butanol and diethyl ether as oxygenated additives on combustion emission performance characteristics of a multiple cylinder diesel engine fuelled with diesel jatropha biodiesel blend ECM D 14 03115R1 |
| |
| Ignition control of natural gas homogeneous charge compression ignition HCCI combustion through adaption of the various fuels ECM D 15 00500R1 |
| |
| Ignition control of natural gas homogeneous charge compression ignition HCCI combustion through adaption of the various fuels ECM D 15 00500R2 |
| |
| Numerical investigation of emission reduction techniques applied on methanol blended diesel engine ECM D 15 04312 |
| |
| Assembly design of proton exchange membrane fuel cell stack with stamped metallic bipolar plates HE D 14 03540 |
| |
| Modeling and experimental validation of water mass balance in a PEM fuel cell stack HE D 15 01433R1 |
| |
| Modeling and experimental validation of water mass balance in a PEM fuel cell stack HE D 15 01433 |
| |
| THM COUPLED MATHEMATIAL MODEL OF FRACTURED MEDIA AND NUMERICAL SIMULATION OF A 3D ENHANCED GEOTHERMAL SYSTEM AT 573K AND BURIED DEPTH 6000 7000M EGY D 14 01789R1 |
| |
| Parametric Analysis of an Irreversible Proton Exchange Membrane Fuel Cell Absorption Refrigerator Hybrid System EGY D 14 04520 |
| |
| Parametric Analysis of an Irreversible Proton Exchange Membrane Fuel Cell Absorption Refrigerator Hybrid System EGY D 14 04520R1 |
| |
| COMPARISONS BETWEEN ENERGY CARRIERS PRODUCTIONS FOR EXPLOITING RENEWABLE ENERGY SOURCES |
| |
| Robust methodology for steady state measurements estimation based framework for a reliable long term thermal power plant operation performance monitoring EGY D 14 02292R2 |
| |
| Energy management in a domestic microgrid by means of model predictive controllers EGY D 15 01020 |
| |
| Robust methodology for steady state measurements estimation based framework for a reliable long term thermal power plant operation performance monitoring EGY D 14 02292R3 |
| |
| Evaluation of the cost of using the waste heat from cogeneration plants in low temperature district heating and cooling networks EGY D 15 01200 |
| |
| Thermodynamic and energy saving benefits of hydraulic free piston engines EGY D 15 02132 |
| |
| Potential Rooftop Photovoltaic Electricity for Electric Transportation in California |
| |
| Energy management in a domestic microgrid by means of model predictive controllers EGY D 15 01020R1 |
| |
| COMPARISONS BETWEEN ENERGY CARRIERS PRODUCTIONS FOR EXPLOITING RENEWABLE ENERGY SOURCES EGY D 15 00916R1 |
| |
| Emissions prediction of hydrogen as an alternative fuel on a V2527 engine with Genetic Algorithm optimised Chemical Reactors Network EGY D 15 01562 |
| |
| Performance Assessment of a New Solar Energy Based Multigeneration System EGY D 15 01625 |
| |
| 3 Dimensional Numerical Simulation of Superadiabatic Radiant Porous Burner with Enhanced Heat Recirculation EGY D 15 04343 |
| |
| The performance of all vanadium redox flow batteries at below ambient temperatures EGY D 15 04314 |
| |
| Three Dimensional Proton Exchange Membrane Fuel Cell Model Comparison of Double Channel and Open Pore Cellular Foam Flow Plates EGY D 15 04077 |
| |
| Sensitivity analyses of biodiesel thermo physical properties under diesel engine conditions EGY D 15 02622 |
| |
| Performance Assessment of a New Solar Energy Based Multigeneration System EGY D 15 01625R1 |
| |
| Robust methodology for steady state measurements estimation based framework for a reliable long term thermal power plant operation performance monitoring EGY D 14 02292R4 |
| |
| Investigation of LBM curved boundary treatments for unsteady flows |
| |
| Effect of Humidification of the Reactant Gases in the Proton Exchange Membrane Fuel Cell |
| |
| Numerical investigation of incompressible fluid flow and heat transfer across a bluff body in a channel flow |
| |
| An Investigation of GDL Porosity on PEM Fuel Cell Performance |
| |
| An Investigation of GDL Porosity on PEM Fuel Cell Performance |
| |
| Investigation of the Lattice Boltzmann SRT and MRT Stability for Lid Driven Cavity Flow |
| |
| Emissions and fuel economy for a hybrid vehicle |
| |
| Experimental investigation on water and heat management in a PEM fuel cell using response surface methodology |
| |
| Performance and emissions of an engine fuelled with a biodiesel fuel produced from animal fats |
| |
| Experimental study of forced convective heat transfer in a different arranged corrugated channel |
| |
| Analysis Of The Effect Of Flow Channel Width On The Performance Of PEMFC |
| |
| THE EFFECT OF OPERATION AND DESIGN PARAMETERS ON THE PERFORMANCE OF PEMFC |
| |
| A note on modelling non rectangular boundaries by the Lattice Boltzmann Method |
| |
| Application of response surface methodology to optimize and investigate the effects of operating conditions on the performance of DMFC |
| |
| Lattice Boltzmann Method for Laminar Forced Convection in a Channel with a Triangular Prism |
| |
| Performance and emission characteristics of a diesel engine using esters of palm olein soybean oil blends |
| |
| Numerical study of assembly pressure effect on the performance of proton exchange membrane fuel cell |
| |
| An Experimental Approach for Engine Mapping |
| |
| Investigation into LBM analysis of incompressible laminar flows at high Reynolds numbers |
| |
| Prediction of convection heat transfer in converging diverging tube for laminar air flowing using back propagation neural network |
| |
| An Analysis of Residual Stresses in Thermal Barrier Coatings A FE Performance Assessment |
| |
| An Experimental Approach for Engine Mapping |
| |
| Two Stage Engine Mapping For The Calibration of Carbon Monoxide Emission |
| |
| Experimental study on forced convection heat transfer characteristics in a converging diverging heat exchanger channel |
| |
| The comparison of two stage and one stage engine mapping |
| |
| The effect of thermal barrier coatings on diesel engine performance |
| |
| Experimental study of the airside performance of tube row spacing in finned tube heat exchangers |
| |
| An experimental study of energy balance in low heat rejection diesel engine |
| |
| Generating hot water by solar energy and application of neural network |
| |
| Experimental study of effective efficiency in a ceramic coated diesel engine |
| |
| Influence of the addition of Cr2O3 and SiO2 on the tribological performance of alumina ceramics |
| |
| Experimental investigation of heat losses in a ceramic coated diesel engine |
| |
| Experimental investigation of heat losses in a ceramic coated diesel engine |
| |
| Influence of the addition of Cr2O3 and SiO2 on the tribological performance of alumina ceramics |
| |
| Use of the finite element technique to analyze the influence of coating materials material phase state and the purity on the level of the developed thermal stresses in plasma coating systems under thermal loading conditions |
| |
| Use of the finite element technique to analyze the influence of coating materials material phase state and the purity on the level of the developed thermal stresses in plasma coating systems under thermal loading conditions |
| |
| The effect of the number of tube rows on heat mass and momentum transfer in flat plate finned tube heat exchangers |
| |
| Comparison of thermal stresses developed in Al2O3 SG ZrO2 12 Si Al and ZrO2 SG thermal barrier coating systems with NiAl NiCrAlY and NiCoCrAlY interlayer materials subjected to thermal loading |
| |
| Comparison of thermal stresses developed in Al2O3 SG ZrO2 12 Si Al and ZrO2 SG thermal barrier coating systems with NiAl NiCrAlY and NiCoCrAlY interlayer materials subjected to thermal loading |
İletişim
taymaz@sakarya.edu.tr(264) 295 5861